AMX, Javelin, Indy heads, performance parts, Jeep, Trendsetters, AMC parts, N.O.S.,1981-86 258/4.2L ALUMINUM VALVE COVER AMC PARTS,AMX PARTS, Javelin Parts ,Jeep, performance parts,Indy heads and intake, even parts for a PT CRUISER, 1981-86 258/4.2L ALUMINUM VALVE COVER


ANYTHING YOU DON'T SEE I MIGHT HAVE, FEEL FREE TO
E-MAIL ME
akjamc@juno.com



PARTS ARE NEW UNLESS NOTED.

ENGINE

1) AMC V-8 timing covers PHOTO
2) oil filter adaptors $45 (includes shipping) PHOTO
3) oil pump kit $20 (incudes shipping) $17 with perches of timing cover and $15 with perches of cover and oil filter adaptor. PHOTO
4) Special oil pressure relief spring for V-8 $12.95 PHOTO
5) Heavy duty distributor hold down clamps. This clamp is almost twice as thick. $17.95 OUT OF STOCK
6) Heavy duty distributor hold down clamps in stainless steel $17.95
7) Distributor hold down stud kit. Don't strip the threads or break the boss on your timing cover. This kit will eliminate this. Comes one stud, flat washer, lock washer ,nut, loctite and allen wrench $12.95 .
8) Or buy both #5 or#6 and #7 for $28.95 PHOTO
9) AMC V-8 guide plates. These are race proven and MADE for your AMC, no cutting and welding, straight bolt on ( bridge pivot heads need the usual work to install individual studs and then these will drop right on) For 5/16 push rod, or 3/8th push rods. $65.95 PHOTO
10) Stainless steel hex head V-8 bolt kit $38 PHOTO
11) same as above but polished $88
12) Stainless steel V-8 allen head $48
13) Stainless steel 6cyl bolt kits $48, polished and allen kit available.
14) Under drive pulleys, 3 and 4 bolt, single and double grove, 30% and 50% reduction, with all bolts and belts $139.95 OUT OF STOCK
15) BHJ balancers TRUE AMC balancer prices start at $345
16)NEW BALANCERS, introductory SPECIAL $134.99 with shipping, each until September 2004.
1) 401 4 bolt
2) 390 3 bolt ( used on 71 401)
3) 360 4 bolt
4) 360 3 bolt ( used on 1970 390)
5) 304 4 bolt
6) 304 3 bolt.PHOTO

17)Rebuilt harmonic balancers $99.95 plus core.
18) Solid motor mounts for V-8. Includes two mounts, 8 studs-nuts-flat and lock washers, allen wrench and Loctite. $48.95 PHOTO
19)1966-91 290-343-390-304-360-401 V-8 motor mount $12.50 each
20) Prothane (urethane) V-8 and 6cyl motor mounts
21) Pacer 6cyl motor mounts ,rebuild your old ones for $129.95 a pair ( or $69.95 each) plus core PHOTO
22) INDY ALUMINUM CYLINDER HEADS
Street/strip $1895
Race $1995 PHOTOS
23) INDY AIR GAP INTAKE MANIFOLD $349.99 PHOTOS
24) Step dowels for late model heads to early block ( set of 4) $20 OUT OF STOCK
25)CAM AND LIFTERS
26) Elgin 478 lift, 298 duration cam and hydraulic lifters $159.99 with shipping,
or $79.99 each with shipping.

27) Crane Hydraulic Roller Cams and Lifters ( many grinds) POR
28) Crane Solid Roller Cams and lifters (many grinds) POR
29)DISTRIBUTOR GEAR 290-401 V-8 distributor gears $42.95 PHOTOS
30)CAMSHAFT GEAR camshaft gear for 290-401 V-8. This is the gear on the cam that driver the distributor gear. $ 38.95 PHOTOS
31) oil pans (factory type) $136
32)Taylor "Hi-Energy" 8mm silicone performance Spark Plug wire set ( V-8)
High energy and high heat application
100% silicone outer jacket and boot for hear protection up to 500 degrees Fahrenheit
Double spring locking spark plug terminals provide a firm grip on plugs
Blue color with 45 degrees angled boot $25
33)1981-86 258/4.2L ALUMINUM VALVE COVER Replaces plastic cover. Kit contains all hard wear and comes in natural aluminum and black finish.$109.99 ( plus shipping)PHOTO
34) Header gaskets for rectangular port ( pair) $12
35) 196-199-232 (1971 - earlier) 6cyl flexplates New improved 2 piece design ,$69.99 PHOTO
36) N.O.S. engine parts

ENGINE USED

1) Holley carbs (inquire)
2) 390s,401s, and parts, other AMC engines and parts

TRANSMISSION

1)T -10 C&C machined 8620 billet bearing retainers $175PHOTO
2)T-10 gasket set $6.50
3)1967-71 Borg Warner Automatic transmission mounts $18PHOTO
4)1967-1974 Borg Warner T-10 4spd transmission mount $18 PHOTO
5)1964-69 American Borg Warner transmission mount $18
6)1972-up Torque flight transmission mounts $18PHOTO

TRANSMISSION USED

1) Used T-10s
SUSPENSION

1) Aluminum leaf spring eye bushing. Good for both straight line and cornering performance. 1-1/2 and 2 inch, and soon American ( no 4cyl) $29.95 a pair.
2) Complete 1964-69 (AMX, Javelin & American) urethane bushing kits With all front and rear suspension bushings ( including the trunnion). Individual parts available as well ( including some parts for the large body AMCs) .$135 complete kitsPHOTO
3) Complete 1970-83 urethane bushing kits. With all front and rear suspension bushings (accept Pacer & Eagle). Individual parts available as well ( including some parts for Pacer & Eagle).$145 for complete leaf spring cars and $165 for coil spring cars .PHOTO
4)SUSPENSION PARTS & KITS Individual parts or complete kits. Rebuilt trunnions, and new leaf and coil springs, ball joints, pit man arms, rubber bushings and more.
5) N.O.S suspension parts. Including shocks. I have three way adjustable shocks.

SUSPENSION USED

Lots of used suspension parts form 1960-1983 part cars.

BODY & TRIM

1) 68-74 AMX and Javelin stainless steel core supports $79.99 for pair w/fasteners.
2) N.O.S. body and trim parts.
3) 1968-69 Javelin one piece fiberglass front end ( fenders, hood, headlights w/doors, flush grille, no bumper, with tilt bars,will fit AMX) $800
4) 1968-74 fiberglass AMX and Javelin pin on trunk lid $175
5) NEW Trendsetters,
for AMX,Javelin. These are reproductions of the original trendsetter that were offered at your local AMC dealer as a dress up item. The kit includes 2 attaching rails and 2 cover shields. $250 PHOTO
6) Magnum 500 center cap inserts.
These are vinyl decals, not made like the originals, but are vary nice. $12 for a set of four.PHOTO
7)Machine wheel center cap inters.
These are vinyl decals, not made like the originals, but are vary nice. $12 for a set of four .PHOTO
8) Rambler "R" wheel cover inserts ( look great on the Magnum 500s too).
These are vinyl decals, not made like the originals, but are vary nice. $12 for a set of four .PHOTO
9)1973 and newer replacement noncollapsible antenna mast $10
10)DETAILING DECALS, air cleaner, valve cover, engine compartment, emissions, interior compartment, and trunk compartment.PAGE
11)1968-69 AMX and Javelin INNER seat trim.
Reproduced out of an injection molded plastic and can be painted to suit your interior color needs. You get a pair of trim, with chrome caps and screws $49.95 with shippingPHOTO
12) HOOD SCOOPS We have reproduced the Machine and SC/360 hood scoops. These are the best ever made. They are hand laid with the best fiberglass cloth available and have the correct mounting stands ( Machine also has the stands for the tach). Machine scoop, $350. SC/360 Hornet scoop, $250.PAGE
13)MACHINE WHEEL CENTER CAP RETAINERS
NOW available a QUALITY reproduction of the 1970 retainers. These are die formed and fit both the
factory 70 type "cone" cap, and the reproduction 1970 center caps, $12.50 each, plus shipping.PHOTO
14)REPRODUCTION MACHINE WHEEL CENTER CAPS
These reproduction center caps are of the 1970 "cone" design. They are molded in urethane, chrome plated and have the inserts. $275 for a set of four.PAGE

BODY & TRIM USED

1968-74 AMX & Javelin,65-74 Ambo convertible, Rebel, And Matador, 61-69 Americans,Spirit, Concord, Gremlin and Hornet.
Can pull or cut what ever sheet metal, floor pan, frame, or sub structure you need N.O.S. PARTS 1938-88

RIMS & TIRES

RIMS & TIRES USED

Machine wheels. Set of 4 used. Rims are very good and solid.
Two trim rings with some dents. POR
Also many new parts and accessories for your Jeep

YOU CAN ALSO LOOK IN THE RESTORATION PARTS AND INTERIOR, CARPET,WEATHERSTRIPPING AND N.O.S. SECTIONS.
IF YOU DO NOT SEE WHAT YOU NEED, FOR PARTS PURCHASE OR QUESTIONS,
CONTACT ME.




ANYTHING YOU DON'T SEE I MIGHT HAVE, FEEL FREE TO
E-MAIL ME
akjamc@juno.com